Nortel DMS-100 Series Reference Manual page 305

Datafilling table CARRMTC
Subfield or
Field
refinement
RMAIRST
RMAIOL
AISOST
AISRST
AISML
AISOL
BERML
BEROL
SLIPML
SLIPOL
SLIPSYNC
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
(continued)
Entry
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
Y
—continued—
Datafilling BAS on RSC-S UK / Europe 4-55
Basic call processing
Explanation and action
Remote multiframe alarm indication signal
return-to-service time. Enter the remote
multiframe alarm indication signal
return-to-service time.
Remote multiframe alarm indication signal
out-of-service limit. Enter the remote
multiframe alarm indication signal out-of-service
limit.
Alarm indication signal out-of-service time.
Enter the alarm indication signal out-of-service
time.
Alarm indication signal return-to-service time.
Enter the alarm indication signal
return-to-service time.
Alarm indication signal maintenance limit. Enter
the alarm indication signal maintenance limit.
Alarm indication signal out-of-service limit.
Enter the alarm indication signal out-of-service
limit.
Bit error rate maintenance limit. Enter the bit
error rate maintenance limit.
Bit error rate out-of-service time. Enter the bit
error rate out-of-service time.
Bit error rate out-of-service limit. Enter the bit
error rate out-of-service limit.
Slip maintenance limit. Enter the slip
maintenance limit.
Slip out-of-service limit. Enter the slip
out-of-service limit.
Enter Y (yes) to indicate the switch operates in
a synchronized region. Slips are accumulated
over 24 h intervals. Enter N (no) to indicate the
switch does not operate in a synchronized
region. Slips are accumulated over 1 min and
5 min intervals.
(continued)