Nortel DMS-100 Series Reference Manual page 420

Extended peripheral module
Hide thumbs Also See for DMS-100 Series:
Table of Contents

Advertisement

4-170 Datafilling ISDN on RSC-S UK / Europe
ISDN operations
Datafilling table LCMINV
Subfield or
Field
refinement
CSPMNO
PMTYTPE
(continued)
PMNO
LCMINFO
Note 1: Make changes to fields with multiple entries in PROMPT mode only.
Note 2: When you enter data in fields link information (LNKINFO) or link map (LNKMAP), you
cannot assign message links to the same interface card. When the interface card supports two or
more links, separate the message links by the number of links on the interface cards. This
separation applies to all interface link types. The link interface types are DS-1, DS30, DS30A, or
PCM-30. Table control issues a warning if you attempt to assign message links on the same
interface card. The assignment of message links to the same interface card can cause an E1
outage if the card fails. An E1 outage is the failure of all message links.
297-8331-815 Standard 10.01 August 1999
(continued)
(continued)
Entry
RCO2
0 to 511
0 to 53
—end—
Explanation and action
Peripheral module type. Subfield of CSPMNO.
Enter the type of PM where the LCM connects
on the C-side. Entry values are the following:
LGCO
ILGC
ILTC
PLGC
RCC
PRCC
RCO2
Peripheral module number. Enter the number
of the PM where the LCME attaches.
Line concentrating module information. The
C-side link information to the RCO2.
Corresponds with information in table
RCCPSINV.

Advertisement

Table of Contents
loading

Table of Contents