Nortel DMS-100 Series Reference Manual page 489

Remote Switching Center Multi-access (RSC-M)
Datafilling table LTCINV
Subfield or
Field
refinement
CSLNKTAB
NMPAIR
NMPORT
OPTCARD
TONESET
Note 1: Make changes to fields with multiple entries in the PROMPT mode. In nonprompt mode,
you can leave out current entries.
Note 2: Enter the continuation mark (+) in fields with multiple possible entries when more data is
specified on the next line or more records are entered. Enter the end mark ($) in fields with multiple
possible entries after the last entry.
(continued)
Entry
refer to
subfields
0 to 31
0 to 63
see list
AUS100
DMS-100 Family XPM International Translations Reference Manual, ISN06 (TDM)
Datafilling Remote Switching Center Multi-Access 5-29
Description
C-side link table. Subfields: NMPAIR and
NMPORT.
Network module pair number. Enter the
network link where the PM is assigned, that
corresponds to PM C-side links 0 through 15.
Network module port. Enter the network port
that corresponds to the above link.
Optional card. This field is a vector with a
maximum of ten entries. Enter this field when
the PLGC/LGCOi+ includes the universal tone
receiver (UTR) or GTR TONE, message card
and the NT7X05 Peripheral/Remote Loader-16
(PRL). If the PLGC/LGCOi+ includes the CMR
card, enter the CMRLOAD.
Note 1: Make changes to fields with multiple
entries in the PROMPT mode.
TONESET. Enter AUS100. Range of values
include DEFAULT, NORTHAM, CHINA100, and
AUS100.
—continued—
(continued)