Nortel DMS-100 Series Reference Manual page 502

5-42 Datafilling Remote Switching Center Multi-Access
Remote Switching Center Multi-access (RSC-M)
Datafilling table RCCINV
Subfield or
Field
refinement
EXTINFO EXTSHELF
(continued)
EXTFRTYP
EXTFRNO
EXTSHPOS
EXTFLOOR
EXTROW
EXTFRPOS
EXTEQPEC
Note 1: For each RSC-M that table RCCINV defines, table RCCPSINV defines a corresponding
tube to allow PCM30 links to be entered on the RSC-M P-side. The PCM30 link numbers that
correspond to the EXT shelf can be entered if table RCCINV defines the EXT.
Note 2: Before the switch deletes a main or EXT shelf from an RSC-M in table RCCINV, the switch
must delete the P-side links from the main or EXT shelf from table RCCPSINV.
Note 3: Make changes to fields with multiple entries in the PROMPT mode.
Note 4: When you enter data in field C-side link table (CSLNKTAB), make sure message links are
not assigned to the same physical interface card. When the interface card supports two or more
links, separate the message links by the number of links on the interface cards. This applies to
interface link types; DS-1, DS30, DS30A, or PCM-30. Table control issues a warning if an attempt
to assign message links occurs on the same interface card. The assignment of message links to
the same interface card can cause an E1 outage (failure of all message links) if the card fails.
297-8331-815 Standard 10.02 March 2004
(continued)
Entry
Y or N
CEXT
0–511
0 –77
0–99
A to Z or
AA to ZZ
0–99
MX86AA
—continued—
(continued)
Description
Extension shelf. This field is datafilled with Y
(yes) for an RSC-M with an EXT shelf. The
field is a boolean with a default value of N (no).
If yes, datafill the following EXT subfields.
Extension shelf frame type. This field defines
the type of shelf frame. Only EXT shelf type
CEXT is allowed for the RSC-M.
Extension shelf frame number. This field
defines the frame number that contains the EXT
shelf.
Extension shelf position. This field defines the
position in the frame of the EXT shelf.
Extension shelf floor. This field defines the floor
that contains the EXT shelf.
Extension shelf row. This field defines the row
that contains the EXT shelf.
Extension shelf frame position. This field
defines the frame position where the EXT shelf
is.
Extension shelf equipment product equipment
code (PEC) code. This field defines the
equipment PEC code of the EXT shelf. The
value for RSC-M with EXT shelf of the field is
MX86AA.