Nortel DMS-100 Series Reference Manual page 106

3-82 Datafilling BAS on RSC-S International
Basic call processing
Datafilling table TRKGRP
Subfield or
Field
refinement
GRPKEY
CLLI
GRPINFO
GRPTYP
TRAFSNO
PADGRP
NCCLS
CARD
Note 1: The set of trunk group types available for use in an office is a function of hardware and
software features. The set of trunk group types available is also a function of feature packages.
The operating company provides the features and packages for the office.
Note 2: Table TRKGRP can have a maximum of 2047 trunk groups. The number of CLLIs
available to name the trunk groups limits this number.
297-8331-815 Standard 10.01 August 1999
(continued)
Entry Explanation and action
refer to Group key. Subfield: CLLI.
subfield
alphanumeric CLLI. Enter the CLLI code for the trunk group
assigned in table CLLI.
refer to Variable group data. When trunk group type is
subfields MAINT, this field contains subfields GRPTYP,
TRAFSNO, PADGRP, NCCLS, and CARD.
Note: Changes to fields with multiple entries
must be made in the PROMPT mode only.
refer to list Group type. Enter the group type for the trunk
group. For maintenance and test trunks, the
range is ITL2, TTL2, LOOPA, MAINT, or
SOCKT.
0 Traffic separation number. This number is not
required for maintenance and test trunks. Enter
0.
refer to list Pad group. Enter the name of the pad group
assigned to the trunk group in table PADDATA.
For maintenance and test trunks, enter IAO
(intra-office trunks). In other occurences, enter
NPDGP.
NCRT A circuit class does not apply. Enter NCRT (no
circuit).
refer to list Card code. Enter the PEC of the maintenance
and test trunk card. Examples of values:
2X90AB, 2X96AA, 2X47AA, and 2X11AA.