Nortel DMS-100 Series Reference Manual page 407

Datafill requirements for ISDN operations
Table
RMMINV
LTGRP
TRKGRP
TRKSGRP
TRKMEM
LNINV
LTDEF
Note 1: Enter data in some of the tables by the kind of trunk group required. Each trunk group type
requires a specified form. Valid trunk group types are TI, TO, T2, IBNTI, IBNTO, IBNT2, PX and ES.
Note 2: Examples of the datafill of tables required to implement ISDN features appear in the next
section. Datafill examples for tables required for basic call processing appear in the basic call
processing section.
Note 3: In tables with fields with multiple possible entries, the continuation mark (CONTMARK), a
plus sign (+) indicates more entries for the tuple on the next line. A dollar sign ($) indicates the end
of entries.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
(continued)
Purpose of table
Remote maintenance module inventory. Identifies an RLCM, RSC-S or
OPM site with the following information:
the frame type
frame number
floor
row
frame position
PEC
PM load and executive program loaded
the C-side PM attached to each RMM
Logical terminal group. Provides capacity to define a maximum of 32 LT
groups. One of the groups is defined as ISDN.
Trunk group. Defines data for each trunk group that associates with the
switching unit.
Trunk subgroup. Lists the supplementary information for each subgroup
assigned to one of the trunk groups listed that TRKGRP lists.
Trunk member. Lists the data that associates with each trunk assigned
to one of the trunk groups and subgroups that tables TRKGRP and
TRKSGRP specify. This table identifies the circuits that associate with
static trunks, dynamic trunks and the test equipment used to test lines
and trunks.
Line circuit inventory. Table lists data for each line card slot.
Logical terminal definition. Defines ISDN terminals and AP for the
service the terminal can access.
—continued—
Datafilling ISDN on RSC-S UK / Europe 4-157
ISDN operations
(continued)