Nortel DMS-100 Series Reference Manual page 315

Extended peripheral module

Hide thumbs Also See for DMS-100 Series:

Table of Contents

Datafilling table RCCINV

Note: When you enter field C-side link table (CSLNKTAB), make sure message links are not

assigned to the same interface card. When the interface card supports a minimum of two links,

separate the message links by the number of links on the interface cards. This action applies to all

interface link types. The interface link types are DS-1, DS30, DS30A, or PCM-30. Table control

issues a warning when you attempt to assign message links on the same interface card. If you

assign message links to the same interface card, an E1 outage can occur if the card fails. An E1

outage is a failure of all message links.

DMS-100 Family XPM International Translations Reference Manual XPM12 and up

Datafilling BAS on RSC-S UK / Europe 4-65

Basic call processing

Explanation and action

Extension shelf. Enter Y if the CPM has an

extension shelf. If Y, the refinements to this

field appear below.

Enter the location of the extension shelf in the

following fields:

EXTSIDE (L or R)