Nortel DMS-100 Series Reference Manual page 164

3-140 Datafilling PCM-30 trunks on RSC-S International
PCM-30 R1 Trunking
MAP example for table TRKGRP
Datafilling table TRKSGRP
Table trunk subgroup (TRKSGRP) lists additional information for subgroups
assigned to a trunk group in table TRKGRP. Specify input data for one or
two subgroups for each trunk group in table TRKGRP. Do not specify input
data trunk groups defined as maintenance (MAINT) group types.
The following procedure describes data entry for table TRKSGRP. This
procedure contains fields that apply to PCM-30 R1 Trunking. Refer to the
data schema section of the Translations Guide for a description of the other
fields.
Datafilling table TRKSGRP
Subfield or
Field
refinement
SGRPKEY
CLLI
SGRPVAR
Note 1: Field SIZE in table DATASIZE allocates memory for the number of trunk subgroups. The
field DATSKEY is equal to TRKSGRP.
Note 2: The maximum number of trunk subgroups is equal to twice the number of trunk groups.
Note 3: You can assign a maximum of 4096 trunk subgroups.
297-8331-815 Standard 10.01 August 1999
(continued)
Table: TRKGRP
GRPKEY
________________________________________________________
MELB MTR 0
QUEENSLAND +
IBNTO 0 ELO NCBN RCO20 0 MIDL ANSDISC +
0 N O 1 8 9 N N N N N N N $
Entry
see subfields
alphanumeric
see list
TLD NCRT IE MIDL
Explanation and action
Subgroup key. Subfields: CLLI and SGRP.
Common language location identifier. Contains
the code assigned in table CLLI to the trunk
group to which the subgroup belongs.
Variable subgroup data. For standard signaling,
contains subfields SIGDATA, DIR, OPULSTYP,
OSTARTSG, IDGTIME, NUMSTOPS, CCONT,
RNGBCK, ESUPR, SAT, REMBSY, DIALMODE,
and TRKGDTIM.
GRPINFO
7 N $