Nortel DMS-100 Series Reference Manual page 102

Extended peripheral module

Hide thumbs Also See for DMS-100 Series:

Table of Contents

3-78 Datafilling BAS on RSC-S International

Basic call processing

Datafilling table RMMINV

297-8331-815 Standard 10.01 August 1999

refer to list

alphanumeric

see subfields

Explanation and action

Frame type. Enter CRSC for the RCO2 shelf.

Enter CEXT for the RCO2 extension shelf. For

an RLCM, enter RLCM. Enter the location of the

RCO2 in fields FRNO, SHPOS, FLOOR, ROW,

Equipment PEC. Enter PEC for an RMM.

Load. Enter the load for the RMM. Make sure

that table PMLOADS contains this datafill.

Exec table. Enter the correct execs for the

C-side PM information. Contains subfields

RMMSELECTOR, CSIDEPM, and CSIDPORT.

RMM selector. Enter the type of module where

C-side peripheral module. Contains subfields

PMT and EXT_PMNO.

PM type. Based on value in field

RMMSELECTOR.

External PM number. Enter the external PM

number where the RMM attaches. This number

must also appear in table LCMINV or RCCINV.

Note: If the field RMMSELECTOR is

RMMRCO2, datafill subfield CSIDPORT as

C-side PORT. Enter the C-side port connected

to the RMM. Enter one tuple with 22 and one

with 23. Refer to datafill example.