Nortel DMS-100 Series Reference Manual page 219

Extended peripheral module
Hide thumbs Also See for DMS-100 Series:
Table of Contents

Advertisement

Datafilling table KSETLINE
Table keyset line (KSETLINE) associates CAPs, ISDN LT call activators
and indicators, with directory numbers (DN) and different feature options.
The datafill example for table KSETLINE shows only the fields that apply
to the ISDN on RSC. Refer to the data schema section of the Translations
Guide for a description of the other fields.
Datafilling table KSETLINE
Subfield or
Field
refinement
KSETKEY
LEN
LTGRP
LTNUM
KEY
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling ISDN on RSC-S International 3-195
CAUTION
Use the Service Order system to add and delete tuples to
and from table KSETLINE.
add or delete tuples. The table editor can result in the
assignment of incompatible features to the line. This table
datafill appears here for information only.
Entry
Explanation and action
see subfields
Keyset key. This field is the key to the
KSETLINE table. Subfield: LEN, or for ISDN
terminals subfields LTGRP and LTNUM, and
subfield KEY.
see subfields
Line equipment number for the card with the
keyset attached. Subfields: SITE, FRAME,
UNIT, DRAWER, and CIRCUIT.
alphanumeric
Logical terminal group. Enter the LT group
name from table LTGRP. This group contains a
maximum of eight characters or digits.
1 to 1022
Logical terminal number. Enter the LT number
in the group.
1 to 69
Key. Enter the number associated with the
physical set key where the DN is assigned. You
must program key number 1 for the set primary
DN and enter before any other DNs. For
M5317 sets, use only keys 1 through 11 for DNs
(CAPs) and keys 1 through 33 for FAPs.
—continued—
ISDN operations
Do not use the table editor to
(continued)

Advertisement

Table of Contents
loading

Table of Contents