Nortel DMS-100 Series Reference Manual page 425

Datafill example for table DCHINV
Sample datafill for table DCHINV appears in the following example.
MAP example for table DCHINV
Datafilling table LTGRP
Table LTGRP provides the capacity to define a maximum of 32 LT groups.
The system defines one of the groups as ISDN. Group names can be any
group of digits or letters to a maximum of eight characters long.
Each group can support a maximum of 1022 LTIDs. With 32 logical groups,
table LTGRP can define a maximum of 32 704 LTIDs (32 x 1022). The LT
group is the key to this terminal. Enter an LT in table LTGRP before you
enter data for an LT from this group in any other table.
Only the fields that apply to the ISDN on RSC-S appear in the datafill
example for table LTGRP. Refer to the data design section of the
Translations Guide for a description of the other fields.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
DCHNO PMTYPE
––––––––––––––––––––––––––––––––––––––––––––––––––––
2 RCO2
3 RCO2
Note: The ISDN is a permanent entry. You cannot add or delete the
ISDN.
Datafilling ISDN on RSC-S UK / Europe 4-175
ISDN operations
PMNO DCHPEC
0 BX02BA
0 BX02BA
(continued)
LOAD PORT
DCH31AW 1
DCH31AW 9