Nortel DMS-100 Series Reference Manual page 126

3-102 Datafilling BAS on RSC-S International
Basic call processing
Datafilling table MTAHORIZ
Subfield or
Field
refinement
SELECTOR CLLI
(continued)
EXTRKNM
BBTNR
EMTAVERT
MJACKNUM
MTAGRP
MTAMEM
297-8331-815 Standard 10.01 August 1999
(continued)
(continued)
Entry
alphanumeric
0 to 9999
0 to 7
0 to 639
1 to 256
refer to
subfields
0 to 255
—continued—
Explanation and action
Common language location identifier.
Enter LTU for line test unit.
Enter MTU for metallic test unit.
Enter MJACK for metal jack.
For operator verification or an incoming test
access trunk, enter the alphanumeric code.
Enter the code that represents this trunk group
in table CLLI.
External trunk number. Enter the external trunk
number assigned in table TRKMEM. The
number is assigned to the line test unit, metallic
test unit, operator verification trunk, or the
incoming test access trunk.
Board-to-board testing number. Enter the
number of the board-to-board set where this
horizontal is associated.
Extended metallic test access column. Enter
the associated vertical on the MTA in the host
where the horizontal is connected.
Metal jack number. When the entry in subfield
CLLI is MJACK, enter the metal jack number.
MTA group. This field contains a list of MTA
drivers that multiply to the test equipment. This
field is a vector of a maximum of 32 multiples of
subfields MTAMEM, HORIZ, and ALTUSE.
MTA minibar driver member. Enter MTAM
driver member number where the horizontal
connects.