Nortel DMS-100 Series Reference Manual page 267

Operation
The RSC software provides each feature. The RSC-S basic package
activates the features and provides the Synchronous Optical Network
(SONET) remote.
Tables and data entry methods do not change for RSC-S in comparison to
the RSC. This release adds new value ranges to relevant fields. The release
notes new data entry limits and adds new fields to enter data on an extension
shelf.
Conditional routing
The RSC-S allows conditional routing. The RSC-S configuration adds the
SITE subselector to plain ordinary telephone service (POTS), Meridian
Digital Centrex (MDC) or integrated business network (IBN) call routing.
The RSC-S configuration data is entered as a subselector of the CND
selector of table IBNRTE, table OFRT, and the RTEREF subtables. Use the
SITE subselector of field CONDITION with route types ST, SK and T.
The system requires the CND selector for conditional routes. Some
conditions must be specified before the system routes a call. If the specified
conditions are met, the system performs the instructions in the route list. If
the conditions are not met, translations looks to the next element in the route
list. Refer to the data schema section of the Translations Guide, for a list
and explanation of each routing condition.
The SITE option is added to field CONDITION. Enter data in field SITE
when CONDITION equals SITE. This change affects the following tables
when the selector is CND:
The SITE condition allows a call to transfer to a route list or an element in a
route list. The call origin determines the transfer. The system compares the
site where the call originates with the site that field SITE defines. If the two
sites match, the call proceeds as the field RTETYPE indicates. If the two
sites do not match, the call proceeds to the next route element in the route
list.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
table IBNRTE
table OFRT
subtable HNPACONT.RTEREF
subtable FNPACONT.RTEREF
Note: To optimize this feature, trunk groups must vary by site.
Members of each trunk group must belong to the specified site.
Datafilling BAS on RSC-S UK / Europe 4-17
Basic call processing
(continued)