Nortel DMS-100 Series Reference Manual page 505

Remote Switching Center Multi-access (RSC-M)
Datafilling table RCCPSINV
Subfield or
Field
refinement
RCCNAME
XPMTYPE
XPMNO
PSLNKTAB
EXP
P-SIDES
EXP TAB
PSLINK
PSDATA
Note: Before the switch can delete an EXT from an RSC-M, the switch must delete the P-side links
that belong to the EXT (that change to NILTYPE).
DMS-100 Family XPM International Translations Reference Manual, ISN06 (TDM)
Datafilling Remote Switching Center Multi-Access 5-45
Entry Description
refer to Link trunk controller. This field consists of
subfield subfields XPMTYPE and XPMNO.
RCO2 External peripheral module type. Enter the
extended multi-processor system PM type
RCO2.
0–255 External peripheral module number. Enter the
PM number.
refer to P-side link table. You can enter a maximum of
subfield 46 PCM30 links in a RSC-M. The default is
NILTYPE. This field consists of subfield EXP
P-SIDES.
Y Expanded P-side platform indicator. If the entry
in field XPMTYPE is RSC-M, enter Y (yes) and
datafill field EXP TAB.
refer to Expansion table. This field consists of subfields
subfield PSLINK and PSDATA.
0–47 P-side link. This field defines the number of
P-side ports. For RSC-M, enter 0-47.
Note: P-side links 22 and 23 are reserved.
D30 P-side data. This field describes P-side link
type.
—continued—
(continued)