Nortel DMS-100 Series Reference Manual page 211

Datafilling table LNINV
Subfield or
Field
refinement
MNO
CARDINFO
Note: When you define an LEN as working in table LNINV, a connection is set up. The connection
is for the four D-channels to one DCH card BRA port. In the LCME, the first four ISDN lines defined
as working in the same physical drawer are mapped together.
Datafill example for table LNINV
The sample datafill for table LNINV appears in the following example.
MAP example for table LNINV
Datafilling table SPECCONN
Table special connections (SPECCONN) contains connections that you
cannot modify using SERVORD. The types of connections follow:
The Bd-channel connection carries service access point identifier 16
(SAPI16) packet data from a DCH to the PH. This connection supports a
maximum of 64 LTs.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
(continued)
Entry
Y
NIL
LEN
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
MELB 04 1 00 04
MELB 04 1 00 05
MELB 04 1 00 06
MELB 04 1 00 07
MELB 04 1 01 00
MELB 04 1 01 01
MELB 04 1 01 02
MELB 04 1 01 03
MELB 04 1 01 04
Bd-channel
Bb-channel
B-channel to B-channel
Datafilling ISDN on RSC-S International 3-187
ISDN operations
Explanation and action
Manual override. Since an on-hook balance
network test will not update field BNV, enter Y.
Card information. Since this field does not
apply to ISDN lines, enter NIL.
—end—
CARDCODE PADGRP STATUS GND BNV MNO CARDINFO
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
BX27AA NPDGP WORKING N
(continued)
NL Y NIL
NL Y NIL
NL Y NIL
NL Y NIL
NL Y NIL
NL Y NIL
NL Y NIL
NL Y NIL
NL Y NIL