Nortel DMS-100 Series Reference Manual page 39

Recovery
Table PMLOADS stores the device location of every peripheral module
(PM) load file. The table stores the location to map between load names and
devices on which the loads reside. Autoload can locate load files without
intervention of personnel. Autoload can load separate PMs suspected to
have a corrupt load.
Trunks and trunk groups
Tables TRKGRP, TRKSGRP and TRKMEM define:
each trunk group for a switching unit
supplementary information for subgroups assigned to trunk groups
data for each trunk, trunk group and subgroup
Other entries identifies circuits for static trunks, dynamic trunks and
equipment used to test lines and trunks.
Alarm functions
Tables ALMSCGRP, ALMSDGRP, ALMSD and ALMSC record
information for scan points and signal distribution points. This information
includes circuit equipment, location and type of circuit pack. This
information also includes functions of assigned scan points and signal
distribution points in the alarm scan groups.
Circuit test equipment
Table TRKMEM identifies circuits for static trunks, dynamic trunks and test
equipment used to test lines and trunks. Tables MTAMDRVE, MTAVERT
and MTAHORIZ include entries to connect test equipment to a circuit that
requires tests.
Maintenance control for peripherals
Table CARRMTC entries include maintenance control information in
peripherals, out-of-service (OOS) limits for alarms and system
return-to-service (RTS) occurrences.
REX scheduler
Table REXSCHED schedules the frequency and number of REX tests. The
system adds tuples to table REXSCHED after you enter data in the inventory
tables.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling BAS on RSC-S International 3-15
Basic call processing
(continued)