Nortel DMS-100 Series Reference Manual page 335

Datafilling table Trunk Member (TRKMEM)
Table TRKMEM contains data associated with trunks assigned to trunk
groups and subgroups specified in tables TRKGRP and TRKSGRP. For an
RSC-S, this table identifies circuits associated with static trunks and test
equipment used to test lines and trunks. Trunk assignment off the P-side of
an RCO2 can occur in table TRKMEM.
The datafill for table TRKMEM appears in the following table. The table
contains the fields that apply to basic call processing. Refer to the data
schema section of the Translations Guide for a description of the other
fields.
Datafilling table TRKMEM
Subfield or
Field
refinement
CLLI
EXTRKNM
SGRP
MEMVAR
PMTYPE
RCO2NO
Note 1: The system allocates memory for the total number of trunks that field TRKGRSIZ in table
CLLI specifies for the correct trunk groups.
Note 2: You can change field TRKGRSIZ in table CLLI for the correct trunk groups to increase table
size . You can perform this action when data is present.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling BAS on RSC-S UK / Europe 4-85
Basic call processing
Entry Explanation and action
alphanumeric The CLLI. Enter the code assigned in table
CLLI to the trunk group where the trunk is a
member.
0 to 9999 External trunk name. Enter the external trunk
number assigned to the trunk.
0 or 1 Trunk subgroup number. Enter subgroup
number.
Refer to Memory variable area. Improvements are of
refinement PMTYPE.
RCO2 Variable data for members. For RSC-S
applications, this field can change. The trunk
can be part of an interoffice trunk or a
maintenance trunk. The position of this trunk
determines the field. For an interoffice trunk,
the subfield is PMTYPE and the improvements
of the PMTYPE.
0 to 511 Remote cluster controller equipment number.
Enter the RCO2 equipment number.
—continued—
(continued)