Nortel DMS-100 Series Reference Manual page 493

Remote Switching Center Multi-access (RSC-M)
for other fields. The default tuple is a CAS interface and has the value of
CAS in the signaling type (SIGNTYPE) subfield in field attributes (ATTR).
The system cannot delete this tuple. The system can change fields ES, SES,
and thresholds for frame and slip losses. Add tuples other than the default
tuple before the tuples can be referenced in table RCCPSINV.
The system can delete these tuples when PCM30 carriers do not associate
with the tuples. The system can change tuples in table CARRMTC when the
associated PCM30 carriers are manually busy (ManB) or offline (Offl).
The datafill for the RSC-M for table CARRMTC appears in the following
tables. Fields that apply directly to RSC-M appear. For complete details on
table CARRMTC, refer to the data schema section of the Translations
Guide.
Datafilling table CARRMTC
Subfield or
Field
refinement
CSPMTYPE
TMPLTNM
Note 1: The DMS switch adds the first tuple for the RSC-M to table CARRMTC during IPL or first
restart after IPL. The CAS is SIGNTYPE of the default tuple and the switch cannot delete or change
this tuple.
Note 2: Add tuples other than the default tuple before the tuples can be referenced in the table
RCCPSINV.
Note 3: Out-of-service timers in the AMC must be greater than the equivalent timers in the DMS
switch.
Note 4: Return-to-service timers in the AMC must be smaller than the equivalent timers in the DMS
switch.
DMS-100 Family XPM International Translations Reference Manual, ISN06 (TDM)
Datafilling Remote Switching Center Multi-Access 5-33
Entry Description
RCO2 C-side node PM type. Enter the PM type of the
node on the C-side of the carrier link (in this
event, RCO2).
alphanumeric Template name. Enter the template name for
the RSC-M ( maximum of 16 characters). This
entry also appears in the inventory tables, field
CARRIDX.
The default value is DEFAULT.
—continued—
(continued)