Nortel DMS-100 Series Reference Manual page 55

Activation/deactivation by the end user
Basic call processing does not require activation or deactivation by the end
user.
Billing
Basic call processing does not affect billing.
Station Message Detail Recording
Basic call processing does not affect Station Message Detail Recording.
Datafilling office parameters
There are no parameters specific to the basic RSC-S configuration.
Parameters that associate with abilities the RSC-S can have, like emergency
stand-alone (ESA), are present. The respective chapters address these
abilities.
The system transfers control of routine exercise (REX) testing for line
concentrating modules (LCM) from parameter LCDREX_CONTROL in
table OFCVAR. Testing LCM ring and voltage values, previously a section
of LCM_REX, separates and becomes an LCM converter test
(LCM_COV_REX). The system transfers control of LCM_REX_TEST and
LCMCOV_REX_TEST, part of system REX (SREX), to parameter
NODEREXCONTROL in table OFCVAR. The system retains parameter
LCDREX_CONTROL to control REX testing of line modules (LM).
Data entry sequence
The following table lists the tables that require entries to implement Basic
call processing. The tables appear in the order in which you must enter the
data.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Note: Perform the LCMCOV_REX_TEST on LCMs, XLCMs, OPMs
and RLCMs.
Datafilling BAS on RSC-S International 3-31
Basic call processing
(continued)