Nortel DMS-100 Series Reference Manual page 434

4-184 Datafilling ISDN on RSC-S UK / Europe
ISDN operations
Datafilling table KSETINV
Table Business Set Inventory (KSETINV) identifies an LTID as an ISDN
keyset. Table KSETINV defines the attributes for the LTID. The keyset can
be a T2317 business set, an M5317t business set and terminals, or equipment
by other manufacturers.
Only fields that apply to the ISDN on RSC-S appear in the datafill example
for table KSETINV. Refer to the data design section of the Translations
Guide for a description of the other fields.
Datafilling table KSETINV
Subfield or
Field
refinement
KSETLEN
LEN
LTGRP
LTNUM
297-8331-815 Standard 10.01 August 1999
(continued)
Note: This is a current table in the MDC translations. Note that you
must enter data for each line card slot in table LNINV.
CAUTION
Make sure you use SERVORD to add and delete tuples to
and from table KSETINV. Do not use the table editor to
perform this action.
Use of the table editor to enter data into this table can
result in assignment of incompatible features to the line.
The table datafill appears here for information only.
Entry
see subfield
see subfields
alphanumeric
1 to 1022
Explanation and action
Keyset line equipment number. The key to table
KSETINV. Contains subfield LEN. For ISDN
terminals, contains subfields LTGRP and
LTNUM.
Line equipment number for the card to which
the keyset attaches. Contains subfields SITE,
FRAME, UNIT, DRAWER, and CIRCUIT.
Logical terminal group. Enter the LT group
name from table LTGRP. This group can
contain a maximum of eight characters or digits.
Logical terminal number. Enter the LT number.
—continued—