Nortel DMS-100 Series Reference Manual page 209

Datafilling table LTGRP
Subfield or
Field refinement
GROUP
GROUPNO
OPTIONS
Note: DPN is a prefix for a series of packet data switches in the data networking system.
Datafill example for table LTGRP
The following example shows sample datafill for table LTGRP.
MAP example for table LTGRP
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Entry
alphanumeric
0 to 15
SAPI16
GROUP GROUPNO OPTIONS
–––––––––––––––––––––––––––––––––––
ISDN 0
LTCO 1
PCCC 2
TESTO 3
Datafilling ISDN on RSC-S International 3-185
ISDN operations
Explanation and action
Logical group name. Enter the name of the
logical group of terminals.
Logical group number. Enter the group number
corresponding to a group name. The number
can be from 0 to 31. Any group with the
SAPI16 option must have a group number from
0 to 15. The DPN recognizes LTs by the LT
group and LT number.
Enter the option. The only option available is
SAPI16. If you specify this option, you can
enter both packet and circuit switching terminals
for this group.
(SAPI16) $
(SAPI16) $
(SAPI16) $
(SAPI16) $
(continued)