Nortel DMS-100 Series Reference Manual page 193

Datafilling table LTCINV for ISDN on RSC-S International
Subfield or
Field
refinement
OPTATTR IBN
PEC6X40
Note 1: When NI-2 is supported, the OPTCARD must contain ISP16. The ISP16 is the designator
of the enhanced EISP (NTBX01BA) card.
Note 2: Make changes to fields with multiple entries in the PROMPT mode. Nonprompt mode can
leave out current entries.
Note 3: Enter the continuation mark (+) in fields with multiple possible entries. Enter the
continuation mark (+) when the next line specifies more data or to enter more records. Enter the
end mark ($) in fields with multiple possible entries after the last entry.
Datafill example for table LTCINV
Sample entries for table LTCINV appear in the following examples. The
first example is for an RC02 with NTMX77AA UP. The second example is
for an RC02 with NTAX74AA CAP.
MAP example for table LTCINV with data entered for NTMX77AA UP
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Entry
$
6X40AC
LTCNAME FRTYPE FRNO SHPOS FLOOR ROW FRPOS EQPEC
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
PLGC 1 LGE 1
EXECTAB
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(POTS POTSEX)(KEYSET KSETEX)(ABTRK DTCEX)
CSLNKTAB
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(0 5)(0 23)(1 5)(1 23)(0 30)(1 30)(0 38)(1 38)
(0 43)(1 43)(0 47)(1 47)(0 54)(1 54)(0 62)(1 62)
OPTCARD
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(UTR9)(ISP16) (NT6X28)
TONESET PROCPEC
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
AUS100 MX77AA MX77AA
Datafilling ISDN on RSC-S International 3-169
ISDN operations
(continued)
Explanation and action
Optional attribute. This is not a DTC for CCS7.
Leave this field blank.
For 6X40 equipment PEC. Enter the version of
the NT6X40 used. The 6X40AC is the required
version for ISDN.
—end—
18 0 C 6
(7X05)
E2LOAD
MX77xxxx
(continued)
LOAD
6X02UA KRI07xx
$
$
$
OPATTR PEC6X40
$ 6X40AC