Local Frx4000/6000 In Configuration Example 3 - Cabletron Systems Netlink FRX4000 User Manual

3-4
LAN Card parameters
FRX4000/6000.
Physical Port parameters
port.
Virtual LAN ID
internal LLC2 function to the Ethernet interface.
Originated LLC2 Host
between the FRX4000/6000 and the AS/400. (The FRX4000/6000 initiates
LLC sessions with the host.) For this example, assume the host number is
can be , but identification can be easier if the host on the LAN side has the
0–128
same number as the LAN card number, which is always
Terminated LLC2 Host
interface to which the 5494 device will transmit. Note that the remote FRX4000/
6000 must have a corresponding originated LLC2 host. For this example,
assume the host number is
Ethernet LLC2 Interface
LAN. For this example, assume the interface number is
with the hosts, identification can be easier if the interface on the LAN side has
the same number as the LAN card number.)
Frame relay terminated LLC2 Interface
mination point at the frame relay interface. Be sure to configure the format as
8025_SRB or 8023_TB (since the AS/400 needs to see the source MAC
address, which is not passed in the third format, Native LLC2). For this
example, assume the interface number is
must have a corresponding originated LLC2 Interface.
Interface 0
Ethernet
Figure 3-4 Local FRX4000/6000 in Configuration Example 3
Some sample LLC2 parameter values to configure on the local FRX4000/6000 are:
Virtual LAN ID –
LLC2 Host 0:
Host MAC Address –
(The 9th and 10th digits of the MAC address make up the host number.)
Session Type –
above MAC address.
(Chapter 5), to configure the Ethernet adapter in the
(Chapter 6 and
(Chapter 9), which identifies a virtual bridge that connects the
(Chapter 9), which maps connectivity at the LLC level
(Chapter 9), whose address must match the frame relay
.
2
(Chapter 9), which defines an interface to the Ethernet
Local FRX
Host 0
Terminated
Originated
(hex).
007
4000000000470
. This host will initiate the LLC2 session to the
Originated
Chapter 7), to define the frame relay
or
0 1
. (It can be
0
(Chapter 9), which defines an LLC2 ter-
. Note that the remote FRX4000/6000
0
Interface 2
Frame Relay
Host 2
Terminated
. This is the AS/400 targeted address.
FRX4000/FRX6000 4.0 User Guide, Rev 01
. (It
0
.)
, but as
0–95