Bridge Generic Filter Parameters; Bridge Mac Filter Parameters - Cabletron Systems Netlink FRX4000 User Manual

Bridge Filter Parameters
Filter Name
Sq
Offset
Value
Mask
15-8
Table 15-2 through Table 15-6 list the various filter parameters. Explanations of some
parameters follow the tables. Explanations of individual masks are not included below
because they were described in general under
Table 15-2 Bridge Generic Filter Parameters
Parameter
Filter Name
Sq
Offset
Value
Mask
Del Allows you to delete the specific entry (defined by the sequence number)
helps the user identify the filter. The name is not used by the software.
is a sequence number to identify the entry.
is the number of octets into the frame to the octet that will be checked against the
Value and Mask.
is used in conjunction with the
page 15-7.
is used in conjunction with the
page 15-7.
Table 15-3 Bridge MAC Filter Parameters
Parameter
Filter Name
Source MAC Address Value
Source MAC Address Mask
Destination MAC Address Value
Destination MAC Address Mask
"How Filter Masks
Valid Values
1–31 characters
1–16
(octets)
0–254
(hex)
0–ff
(hex)
0–ff
as described under
Mask
as described under
Value
Valid Values
1–31 characters
0–ffffffffff (6 bytes)
(6 bytes)
0–ffffffffff
0–ffffffffff (6 bytes)
0–ffffffffff (6 bytes)
FRX4000/FRX6000 4.0 User Guide, Rev 01
Work" on page 15-7.
Default Value
none
1
0
0
0
"How Filter Masks Work" on
"How Filter Masks Work" on
Default Value
none
ffffffffff
ffffffffff
ffffffffff
ffffffffff