Lan Capture Display - Cabletron Systems Netlink FRX4000 User Manual

Displaying Capture Data
19-18
Possible parameter settings are:
Parameter
LAN Card
Trace IP
Trace IPX
Trace Bridge
Trace Unknown
When Full
IP, IPX, and Bridge can be set to
(FRX6000) or in the device (FRX4000).
If is
When Full Stop
If is
When Full Wrap
in the buffer as necessary. (The first data in will be the first overwritten.)
The function keys work as follows:
refreshes the screen, with any changes that were made to items A–F.
[F1]
starts a capture.
[F7]
stops the capture.
[F2]
returns to the next higher menu. A capture in progress will remain active.
[F3]
purges the buffer.
[F4]
To display captured LAN data, press
be similar to the following:
NumTimeD Type Len
------------------ ------ ------
00001000.00I0 IP
FFFFFFFFFFFF 0000C0DCBE28 0806 HDOHDHDNJJJFEFELMFFOFKOEKFOEKFO
EKFOEKFOKEWFOKEFOKMFEMFOKF EWKFEWKFFLELF
00002002.40O0 IP
FFFFFFFFFFFF 0000C0DCBE28 0806 HDOHDHDNJJJFEFELMFFOFKOEKFOEKFO
EKFOEKFOKEWFOKEFOKMFEMFOKF EWKFEWKFFLELF
00003004.30I0 IP
FFFFFFFFFFFF 0000C0DCBE28 0806 HDOHDHDNJJJFEFELMFFOFKOEKFOEKFO
EKFOEKFOKEWFOKEFOKMFEMFOKF EWKFEWKFFLELF
+ - PgUp,PgDn F3: Exit F4: Purge Capture F7: Go to ev #
Figure 19-9 LAN Capture Display
Values
0, 1, Both, None
On, Off
On, Off
On, Off
On, Off
Stop, Wrap
only if the protocols are loaded on the RLP
On
, the capture will stop automatically when the buffer is full.
, the monitor will continue to capture data, overwriting data
at the Traffic Monitor Menu. The display will
[C]
Event 2 of 1: 6
Data
-------------------------------------------------------------
0100
0100
0100
Node Name=node_xyz
from Main Menu
[C],[E],[C]
FRX4000/FRX6000 4.0 User Guide, Rev 01