Configuring Frame Relay Ports; Frame Relay Port Screen 1 - Cabletron Systems Netlink FRX4000 User Manual

Configuring Frame Relay Ports

Configuring Frame Relay
Once the necessary Node and RLP parameters have been configured, press
Port Configuration Menu (or
(FRX6000 only) RLP containing the port:
(RLP numbers are described in Chapter 5.)
Port (see port locations
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See
4.) The following figure is an example of an existing port.
Frame Relay Port Parameters (screen 1 of 2)
* RLP: 0 Port: 0
* I/O: V.35
A Port Type
B Physical Port Interface
C Blocked Port Flag
D Line Speed
E Maximum Bytes per Frame
F Logical DCE
G Generate Clock
H Rcv Clock (TT) from DTE
I Link Management
J N1 Polling Count
K N2 Error Threshold
L N3 Monitored Events Count
M T1 Link Integrity Timer
N T2 Polling Verification Timer
O Additional Parameters
Option:
Figure 7-3 Frame Relay Port Screen 1
The above is an example of an existing frame relay port. On an FRX4000
with
Physical Port Interface
different.
After making any changes, be sure to press
system memory. Otherwise, the changes will not take effect until
the next re-boot of the FRX4000/6000.
Pressing will display a screen similar to the following.
[O]
from the Main Menu. When prompted, enter:
[A], [C], [A]
0–7
in Chapter 6): . (The default is
0–7
Node Name=node_xyz
Link State: Linkup
Database System Memory
Frame Relay Frame Relay
V.35 V.35
N N
64K bps 64K bps
1600 1600
N N
N N
N N
2 Annex D 2 Annex D
6 6
3 3
4 4
10 10
15 15
(item B) configured as
. (The default is .)
0
.)
0
Table 7-3 and
from Main Menu
[A],[C],[A]
, items G and H will be
DSU
to update the
[F7]
at the
[A]
Table 7-
7-9