Lan Card Configuration Screen; Lan Card Parameters On Frx6000 - Cabletron Systems Netlink FRX4000 User Manual

LAN Card Parameters
Type
Locally Admin. MAC Addr
Configuring Cards and Protocols
LAN Card Configuration
* Interface Number: 0
A Type
B Locally Admin MAC Addr
Option:
Figure 5-6 LAN Card Configuration Screen
Press after making any changes, to send the configuration to the LAN interface.
[F7]
If the node is connected to a LAN after this record is created, or if the node
becomes disconnected from the LAN, the LAN connection must be ini-
tialized/re-initialized by opening Lan Card Configuration, then pressing
to send the configuration to the LAN interface. (Be sure the FRX6000
[F7]
is connected to the LAN before performing this operation.)
Table 5-5 LAN Card Parameters on FRX6000
Parameter
Type
Locally Admin. MAC Addr
Must match the installed card that corresponds to the specified
1
is the type of LAN card.
is a MAC address that will override the universally administered MAC address. If all
zeros are specified, the universal address will be used. Under most circumstances, this
parameter should be left at the default setting.
Node Name=nodexyz
Token Ring
400000000001
from Main Menu
[A],[C],[B]
Valid Values
Ethernet, Token Ring
000000000000–7ffffffffffff
Default Value
1
Ethernet
000000000000
.
Interface Number
5-15