Ipx Rip Static Route Parameters - Cabletron Systems Netlink FRX4000 User Manual

IPX RIP Static Route Parameters

Network
Hops
Transport Time
Router
Interface
Configuring IPX
Table 14-10 IPX RIP Static Route Parameters
Parameter
Network
Hops
Transport Time
Router
Interface
The highest interface in the IPX Interface file.
1
is the IPX network address of the network containing the node defined by
.
Number
is the number of routers in a packet's path to the destination network.
is the time (in 55-millisecond units) that it will normally take a packet to reach the des-
tination network if this route is used.
Is the hex value of the node address of the router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file, described earlier in this chapter), this field will be ignored.
is the IPX network number assigned to the interface used to send packets that are using
this route.
Valid Values
1–fffffffe (4 bytes)
0–65535
0–65535
(6 bytes)
0–fffffffffffe
1
note
0–
Default Value
00000001
1
1
000000000001
0
Node
14-17