Ipx Sap Static Route Parameters - Cabletron Systems Netlink FRX4000 User Manual

IPX SAP Static Route Parameters

Service Type
Server Name
Server Network Address
Server Node Address
Server Socket Number
Intervening Networks
Router
Interface
14-18
Table 14-11 IPX SAP Static Route Parameters
Parameter
Service Type
Server Name
Server Network Address
Server Node Address
Server Socket Number
Intervening Networks
Router
Interface
is a SAP Service Type code. Some common types are:
= print queue
0003
= print server
0007
identifies a specific server in the IPX internetwork.
is an IPX network number assigned to the network containing the server identified by
Server Name.
identifies the IPX node attached to the server network.
is an IPX socket number that identifies the process. For example, the SAP process is
.
0452
is the number of routers that a packet must pass through to reach the server, if this
route is used.
is the hex value of the node address of the router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file), this field will be ignored.
is the IPX network number assigned to the interface used to send packets that are des-
tined for this server.
Valid Values
0–65535
1-48 characters
(4 bytes)
1–fffffffe
1–fffffffffffe
0–ffff
1–65535
1–fffffffffffe
0–65535
= file server
0004
= archive server
0009
FRX4000/FRX6000 4.0 User Guide, Rev 01
Default Value
0
asterisk (wildcard)
00000001
(6 bytes)
000000000001
0000
1
(6 bytes)
000000000001
0
= job server
0005
= remote bridge server
0024