Local Netview Access; Netview Access Options Menu - Cabletron Systems Netlink FRX4000 User Manual

Local NetView Access

C-2
The FRX4000 and FRX6000 support a local NetView access function that allows the
node operator to send commands from the node to lines and PUs. This function is only
between the node and lines/PUs—the commands and responses are not transmitted to
NetView.
To display the NetView Access Options Menu, press
tions Menu (or
[B], [A], [H]
NetView Access Option Menu
A Input FileName
B Output FileName
C Write to File
D Read From File
E Read From Keyboard
F Execute Last Command
Option:
Figure C-1 NetView Access Options Menu
Commands can be sent individually or via a batch file. You can also create a batch file
made up of commands you send. The supported commands are described later in this
chapter.
The various operations work as follows:
To send commands from the keyboard, select
the desired command(s). If you want to create a batch file of the commands you
send, specify the desired
do not want to create a batch file, make sure
To repeat the last command you entered, press
To send commands from an existing batch file, specify the desired
, then select
Name
and each command after the first one will be executed only after you press
from the Main Menu).
nmvtCmd.in
nmvtCmd.out
OFF
, then specify
Input File Name
. The commands will be executed one at a time,
Read From File
at the On-Line Node Opera-
[H]
Node Name=node_xyz
from Main Menu
[B],[A],[H]
Read From Keyboard
for
ON Write To File
is .
Write To File OFF
.
[F]
FRX4000/FRX6000 4.0 User Guide, Rev 01
, then enter
. If you
Output File
.
[F2]