Configuring Llc2 Interfaces; Llc2 Interfaces Display - Cabletron Systems Netlink FRX4000 User Manual

Configuring LLC2 Interfaces

9-26
LLC2 Interfaces records define the types and locations of the interfaces that will carry
LLC2 traffic to or from an FRX4000/6000.
To display configured interfaces, press
Configuration Menu:
Review Bridge Ports/LLC-2 Interfaces
----------------------------------------------------------------------------------------------------------------------
Interface NumberType RLP
-----------------------------------------------------------------------------------------------------------------------
1 Ethernet
2 Frame Relay
3 Frame Relay
4 Frame Relay
5 Frame Relay
PgUp, PgDn, F3:Exit, F9:Stop Remote, F10:Abort
Figure 9-9 LLC2 Interfaces Display
These interfaces can be used for either LLC2 or Bridging.
To configure an interface, press
prompted for an interface number (which is merely a sequential number to identify the
interface):
If modifying an existing record, enter the interface number:
If creating a new record, press
available sequential interface number.
The display depends on the interface type. Examples are shown in the following two
figures.
at the IP/LLC2/BRIDGE.IPX Interfaces
[C]
PortDLCIFormat
0 1 30 Native LLC-2
0 1 31 8025_SRB
0 1 32 8025_SRB
0 1 33 8023_TB
at the LAN Interfaces Configuration Menu. When
[D]
, which will automatically specify the next
[Enter]
Node Name=nodexyz
from Main Menu
[A],[C],[E],[C]
.
0–95
FRX4000/FRX6000 4.0 User Guide, Rev 01