Chapter 2 Local Management; The Wan Physical Configuration Screen - Cabletron Systems WPIM-DDS Management Manual

This chapter explains how to configure the WPIM-DDS through Local
Management. The WAN Physical Configuration screen and the WAN
Interface Configuration screen appear as Local Management menu
selections after you install the WPIM-DDS into a WAN module such as
the BRIM-W6 and then install the BRIM into a MIM or standalone hub.
Refer to the MIM or standalone hub User's Guide for instructions about
how to set up and access Local Management.
Sections of this chapter include the following:
• The WAN Physical Configuration Screen
• The WAN Interface Configuration Screen
• WPIM-DDS Configuration
Read Sections 2.1 and 2.2 to gain an understanding of the WPIM-DDS
Local Management screens. Section 2.3 provides examples for setting up
the WPIM-DDS in a PPP (LEX or BNCP) or Frame Relay environment.
2.1

THE WAN PHYSICAL CONFIGURATION SCREEN

To access the WAN Physical Configuration screen from the Setup screen,
use the arrow keys to highlight the WAN BRIM Setup option, then press
ENTER. The screen shown in Figure 2-1 appears.
WPIM-DDS Local Management Guide
CHAPTER 2
LOCAL MANAGEMENT
2.1
2.2
2.3
2-1