Configuring A Community Table; Snmp Community Table Menu - Cabletron Systems Netlink FRX4000 User Manual

System Contact

Configuring a Community Table

Configuring SNMP
identifies someone at the node site who can be contacted if there are issues.
Up to 16 SNMP manager devices can gain access to the SNMP agent in an FRX4000
or FRX6000. Each manager device is configured with a community name, which
identifies it to agents and other managers, and is included in SNMP requests to a node.
A request will be accepted only if the name is in the node's Community Table.
Press at the SNMP Configuration Menu to display the table.
[B]
Community Table
A Seq B Name
1 name1
2 name2
3 name3
4 name4
5 name5
6 name6
7 name7
8 name8
9 name9
10 name10
11 name11
12 name12
13 name13
14 name14
15 name15
16 name16
Option::
Figure 16-2 SNMP Community Table Menu
To configure an entry, press the corresponding "
entry, select it, then press
deleted one will move up one in the list.
C Access D Del
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Seq
(and when asked to confirm). All entries below a
[D] [Y]
Node Name=node_xyz
[A],[A],[D],[B] from Main Menu
" (sequence) number. To delete an
16-3