Ip Interface Parameters - Cabletron Systems Netlink FRX4000 User Manual

File Name
BRGFLTD.DAT
BSCDSP.DAT
COMPAR.DAT
CUGPAR.DAT
ERRMSG.TXT
FRBKUPGR.DAT
FRDLCI.DAT
IPISUB.DAT
IPRSUB.DAT
IPSEC.DAT
IPXISUB.DAT
IPXRSUB.DAT
LANPAR.DAT
LOGPAR.DAT
LLC2HPAR.DAT
LLC2IPAR.DAT
LLCLHSVC.DAT
LLCRHSVC.DAT
PADLOG.DAT
PRTPAR.DAT
PVCSUB.DAT
ROLLOVER.TXT
S1PWD.DAT
SDLCPU.DAT
STDPAR.DAT
SVCSUB.DAT
TRPPAR.DAT
UPDATE.TXT
VERSION
XLTPAR.DAT
ROLLOVER.TXT exists only in FRX4000s shipped prior to a certain date in 1997. Later units have a newer
1
version of flash memory that does not require this file.
Restore
18-10
Table 18-1 FRX4000 Database Files
Description
Bridge filter definitions
BSC devices parameters
SNMP community table parameters
X.25 closed user group parameters
Event (alarm) messages
Frame Relay Backup Groups
Frame relay DLCIs

IP interface parameters

IP static route parameters
IP secondary addresses
IPX interface parameters
IPX static route parameters
LAN card parameters
Logical port parameters
LLC2 host parameters
LLC2 interface parameters
LLC2 originated host SVC parameters
LLC2 terminated host SVC parameters
Async PAD login parameters
Physical port parameters
PVC connection parameters
File that notifies flash memory of new year
Password file, created if you change the password
SNA PU parameters
Statistics parameters
SVC subscriber parameters
SNMP trap routing parameters
List of files sent during a Remote Software Update
Software release number
X.25 Address translation templates
This operation applies only to an FRX4000 with a PC attached to the
Console port. The PC must be running Procomm Plus with ZMODEM. The
procedure was tested using Procomm Plus 2.1 for Windows, but other ver-
sions containing ZMODEM should also work. It is assumed that anyone
performing this procedure knows how to use ZMODEM.
1
FRX4000/FRX6000 4.0 User Guide, Rev 01