Configuring Ip Node Defaults; Ip Node Defaults Menu - Cabletron Systems Netlink FRX4000 User Manual
Frame relay access products
Hide thumbs
Also See for Netlink FRX4000:
- Maintenance manual (60 pages) ,
- Installation and setup manual (8 pages) ,
- User manual (420 pages)
Table of Contents
Advertisement
Configuring IP Node Defaults
13-4
Each FRX4000/6000 supports one of three versions of the Routing Information Pro-
tocol (RIP), which used by IP to update routing tables. The device can be configured
to support RIP Version 1, Version 2 Multicast, or Version 2 Broadcast. Updates in
any of the three versions can be received; however, only updates of the configured
version will be transmitted.
If you will be using RIP version 1, you do not need to configure a version, since
version 1 is the default in the database. If you will be using another version, press
at the Configure IP/LLC2/BRIDGE/IPX Default Parameters Menu (or
from the Main Menu).
IP Node Defaults Menu
A RIP Version Number
Option:
Figure 13-1 IP Node Defaults Menu
After changing the RIP version, press
the node with the change.
Node Name=nodexyz
RIPv1
[A],[A],[E],[A]
from the Main Menu, to update
[A], [C], [E], [G]
FRX4000/FRX6000 4.0 User Guide, Rev 01
[A]
[A], [A], [E], [A]
from Main Menu
Advertisement
Table of Contents
