Remote Control From An Frx4000/6000 - Cabletron Systems Netlink FRX4000 User Manual

Remote Control from an FRX4000/6000

Rebooting the Remote Node
Exiting Remote Control
18-2
1. Press at the On-Line Node Operations Menu (or
[A]
Menu) of the controlling node. When prompted, enter a
Remote Control Pwd (Password)
Main Menu, or see
2. When prompted to press any key to continue, press
3. The remote ID (
Node Name
If a Call Accept is not received in the time specified by the X.25 parameter
Incoming Call Timer
Node Defaults on the local node. Once the connection is successful, the displayed
remote ID becomes the
4. When asked:
Are you a PAD user?
5. When prompted, enter the password of the controlled node. The display at the
controlled node will say:
Main Menu at the controlling node will act as the Main Menu of the controlled
node, and the displayed remote ID is the ID of the controlled node.
Before rebooting, notify all users of this node, since all connec-
tions on all ports will be cleared.
To reboot a node under remote control, follow this procedure at the controlling node:
1. Press .
[F10]
2. When asked:
Remote reboot the node?
3. Press to return to local control.
[F9]
Press to stop remote control. When asked:
[F9]
nodes will now be under local control. The local FRX4000/6000, and the remote
device (if it has a local video device), will be logged out to the Port Status Display.
From there, the operator must log in to perform menu operations.
If either the controlling or the controlled node detects that the remote control link
failed during a remote session, remote control will be terminated and each terminal's
local main menu will be displayed.
, configured in Node Defaults (
Chapter 4) on the node you want to control.
) is displayed as
, the remote ID is displayed as the
Remote Control ID
, type
n [Enter]
Under remote control. Keyboard blocked by id = "n."
, press
from the Main
[B], [A], [A]
Remote Control ID
[A], [A]
.
[Enter]
during Call Request processing.
wait
Node Name
specified for the controlled node.
.
.
[Y]
, press
Stop remote control?
FRX4000/FRX6000 4.0 User Guide, Rev 01
and
from the
T21
configured in
The
. Both
[Y]