Lan Cards; Lan Card Identification In Frx6000 - Cabletron Systems Netlink FRX4000 User Manual

LAN Cards

5-14
You can display a report that identifies any LAN cards in the node. Press
Port Configuration Menu (or
contents of the file PROTOCOL.INI (which can also be printed from DOS or copied
to a diskette—see "Database Backup and
TOCOL.INI,
Bindings = "nnn,"
as shown in the following table.
Table 5-4 LAN Card Identification in FRX6000
LAN Card 0
SMC Ethernet
SMC Ethernet
SMC Token Ring
SMC Token Ring
SMC Token Ring
SMC Ethernet
IBM Token Ring
IBM Token Ring
IBM Token Ring
SMC Ethernet
The SMC cards are the current LAN cards available from Cabletron.
The IBM card is supported for existing customers.
The Netlink FRX6000 Maintenance Guide describes the complete con-
tents of PROTOCOL.INI and the LAN configuration part of
CONFIG.SYS.
To configure a record for a LAN card in an FRX6000, press
ration Menu. (Unlike serial ports, there are not separate files for the cards and the
ports.) When prompted for an
whichever number corresponds to the card as defined in PROTOCOL.INI.
from the Main Menu). The display will be the
[A], [C], [G]
Restore" on page 18-6). One line of PRO-
can be read to easily identify the installed LAN cards,
LAN Card 1 Bindings =
not installed
SMCMAC8001
SMC Ethernet
SMCMAC8001,SMCMAC8002
not installed
SMC8100_NIF
SMC Token Ring
SMC8100_NIF,SMC81002_NIF
SMC Ethernet
SMC8100_NIF,SMCMAC8001
SMC Token Ring
SMCMAC8001,SMC8100_NIF
not installed
NLK_TOK
IBM Token Ring
NLK_TOK,NLK_TOK2
SMC Ethernet
NLK_TOK,SMCMAC8001
IBM Token Ring
SMCMAC8001,NLK_TOK
, type
Interface Number
at the Port Configu-
[B]
or
[0] [Enter] [1] [Enter]
FRX4000/FRX6000 4.0 User Guide, Rev 01
at the
[G]
,