Ipx Statistics Displays; Ipx Statistics Display - Cabletron Systems Netlink FRX4000 User Manual

IPX Statistics Displays

Information in this Display:
Statistics Displays
IPX statistics track IPX traffic through a node. Press
when prompted, enter:
Interface Number
:
Report Interval 5–65535
IPX Statistics Display (Page 1 of 3)
Interface: 0
Current Time:–06/15/97 10:32:45
STATISTIC CURR CUMULATIVE
Pkts to Route
NetB Hops_2_Lrg
Path Not Fnd Pkt
RIP G_Query Tx
RIP G_Resp_Tx
RIP Pkts Rcv
RIP N_Query Rcv
RIP N_Resp Rcv
RIP Prd_Broadcast
RIP INV Net Rcv
RIP Ukn G_Query
RIP Ukn G_Resp
PgUp, PgDn, F4:Clear Cumulative Statistics, Others:Exit
Figure 20-12 IPX Statistics Display
There are three screens of IPX statistics. Pressing
there is one), and pressing
statistics are listed below.
– is the number of IPX packets routed through the local node.
Pkts to Route
– is the number of routed packets that were discarded because
Hops Too Large
the hop count exceeded 15, the maximum allowable.
NetB Hops_2_Lrg
because the hop count exceeded the number of NetBIOS Hops specified in the
IPX Interface record for the local FRX4000/6000 interface.
RIP No Net Addr
address. The network address configured for the interface will be used.
Path Not Fnd Pkt
because a route to the destination network cannot be found.
– is the number of RIP packets transmitted on the interface.
RIP Pkts Tx
– is the number of RIP General Queries transmitted on the
RIP G_Query Tx
interface.
: . (Default is .)
0–63 0
. (Default is .)
5
Report Interval (sec): 5
STATISTIC
10 10000 Hops Too Large
10 10000 RIP No Net Addr
10 10000 RIP Pkts Tx
10 10000 RIP N_Query Tx
10 10000 RIP N_Resp Tx
10 10000 RIP G_Query Rcv
10 10000 RIP G_Resp Rcv
10 10000 RIP Aged_Entries
10 10000 RIP Upd_Broadcast 10
10 10000 RIP Worse Rt Rcv
10 10000 RIP Ukn N_Query
10 10000 RIP Ukn N_Resp
will display the previous one (if there is one). All IPX
[F6]
– is the number of NetBIOS packets that were discarded
– is the number of RIP entries received with no network
– is the number of RIP packets that cannot be transmitted
at the Statistics Menu and,
[F]
Node Name=node_xyz
CURR CUMULATIVE
10 10000
10 10000
10 10000
10 10000
10 10000
10 10000
10 10000
10 10000
10000
10 10000
10 10000
10 10000
[E],[F] from Main Menu
will display the next one (if
[F7]
20-17