Address Translation Template Screen - Cabletron Systems Netlink FRX4000 User Manual

Configuring X.25
To add or change a translation template, press
Templates menu and enter:
(FRX6000 only)
: . (The default is
Port 0–7
: (for incoming packets) or
Direction I
: up to 31 characters (including the
Template ID
below), in the format:
aaaaaaaaaaaaaGbbbbbbbbbbbbbbUddddddddddddddd
where:
aaaaaaaaaaaaaa
is the letter "G," which precedes any calling address,
G
bbbbbbbbbbbbbb
is the letter "U," which precedes any user data, and
U
ddddddddddd
The fields must match the equivalent fields in the Call Request packet, but not neces-
sarily literally—they can use wildcards.
Translation Template Maintenance
* Port
* Direction
* Template ID
A Template Name
B Called Address
C User Data
D Calling Address
E Protocol ID
F Facilities
Option:
Figure 8-10 Address Translation Template Screen
: . (The default is
RLP 0–7
.)
0
(for outgoing packets). (The default is
O
is up to 15 digits of called address,
is up to 15 digits of calling address,
is a user data field of up to 12 numeric characters.
3
I
223*G19972U111154321*
tempexamp
P
D
L12345C23U234
P
P
at the X.25 Address Translation
[B]
.)
0
and separators described
G U
Node Name=nodexyz
from Main Menu
[A],[C],[C],[B]
.)
I
8-29