Chapter 16 Configuring Snmp; Introduction - Cabletron Systems Netlink FRX4000 User Manual
Frame relay access products
Hide thumbs
Also See for Netlink FRX4000:
- Maintenance manual (60 pages) ,
- Installation and setup manual (8 pages) ,
- User manual (420 pages)
Table of Contents
Advertisement
Chapter 16
Configuring SNMP
Introduction
The SNMP (Simple Network Management Protocol) agent allows a network man-
agement station using internet protocol to obtain information from Cabletron frame
relay access products. Access to the agent is through any IP interface, including frame
relay or X.25 ports configured for IP, and LAN interfaces.
The agent handles
and (for some fields)
commands from the SNMP manager
get
set
to provide topology information and node status. This information is retrieved by
calling it from the Management Information Base (MIB).
FRX and FRM support parts of the Internet-standard MIB II (RFC 1213), as well as
the frame relay MIB (RFC 1315), the SDLC MIB (RFC 1747), the X.25 MIBs (RFC
1381 and 1382), and a Cabletron-proprietary Netlink MIB. The tree structures are
shown in the MIB Reference Guide (part number 09-41-06-149), which is available
from Cabletron Systems, Inc.
Advertisement
Table of Contents
