Configuring Static Ipx Routes; Ipx Rip Route Record - Cabletron Systems Netlink FRX4000 User Manual

PVC Connection
Descriptions of Parameters Specific to LAN Interfaces
LAN Card Number

Configuring Static IPX Routes

14-16
identifies this interface as one end of a PVC.
identifies the card. The first or only LAN card installed is always card
second is card . (Although the FRX4000 does not have a LAN card, it's LAN
1
interface is identified as
Routing of IPX traffic is handled dynamically by such protocols as RIP and SAP, as
well as via static routes configured in the FRX4000/6000.
To display configured static routes, press
Menu (or from the Main Menu).
[A], [D], [H]
To configure a route, press
prompted, enter:
: (RIP) or
Type 0
Route/Service Number
The display will be similar to the RIP example in the following figure. (A SAP record
will display different parameters.)
IPX Route Maintenance
* Type
* Route Number
A Network Address
B Hops
C Transport Time
D Router
E Interface
Option::
Figure 14-5 IPX RIP Route Record
.)
0
at the Connections and Routing Paths
[H]
at the Connections and Routing Paths Menu. When
[I]
(SAP). (The default is
1
: . (The default is
0–65535
0–RIP
23
0000f0ac
26
30
00000000ff34
5
.)
0
.). This is simply an identifier.
0
Node Name=node_xyz
[A],[D],[I] from Main Menu
FRX4000/FRX6000 4.0 User Guide, Rev 01
, and the
0