Cabletron Systems Netlink FRX4000 User Manual page 117

Local Charging Prevention
Reverse Charge Acceptance
Fast Select Acceptance
Incoming Calls Barred
Outgoing Calls Barred
Mask Link Alarms
Maximum Packet Size
Default Packet Size
Maximum Window Size
Default Window Size
Maximum Throughput Class
Default Calling Address
Configuring X.25
included in a call packet will be used. (If a class for either direction is not included, its
default value will be used.)
prevents calls (if ) from being charged to this port. Incoming calls from the network
Y
with Reverse Charging specified will be rejected; outgoing calls will have Reverse
Charging inserted if it is not already in the call packet.
authorizes transmission of incoming calls that request the X.25 Reverse Charging
facility. If this parameter is set to
not be transmitted.
authorizes transmission of incoming calls that request the X.25 Fast Select facility.
is an X.25 facility that prevents transmission of incoming calls to this port.
is an X.25 facility that prevents transmission of outgoing calls from this port.
prevents (if enabled) transmission to the collecting node of the link alarms 400-406
(
Link Enabled, Link Disabled
is the maximum data packet size that will be allowed to pass through this port. A
packet size included in a call setup packet will be used, as long as it is smaller than the
maximum specified here.
will be assigned to an incoming call setup packet if the packet does not request a
packet size.
is the maximum number of unacknowledged packets per logical channel that can pass
through the port.
will be assigned to an incoming call setup packet if the packet does not request a
window size.
specifies the default throughput class that will be inserted into a Call Request packet
if Throughput Class Negotiation is not enabled or if a throughput class is not requested
in the Call Request. This value should not be higher than the line speed specified for
the physical port. Valid values (in bits per second) are:
75 150
4800 9600
will be inserted into to an incoming Call Request packet if the packet does not contain
a calling address.
and a call requests Reverse Charging, the call will
N
, etc.)
300 600
19.2K 48K
1200 2400
64K
8-11