Subscriber Parameters - Cabletron Systems Netlink FRX4000 User Manual

Subscriber Parameters

Subscriber Name
Routing Algorithm
Systematic Redirection
12-16
Parameter
Subscriber Name
Routing Algorithm
Systematic Redirection
Redirect on Busy
Redirect on Out of Order
Connection Priority
1st, 2nd,etc. Path Configured
RLP
Port
Redirection Address 0,1,etc.
1 The software does not verify that the specified RLP/port exists. Make sure the specified
RLPs and ports are configured in the database, and that they actually exist.
identifies the subscriber to the console operator.
allows creation of a "hunt group" of ports (see example on
of routing per a pre-selected algorithm:
= Round Robin – selects ports specified cyclicly in numerical order according
0
to the list of Redirection Addresses. If the selected port is unreachable or con-
gested, the Call Request will be sent to the next port. (If the port becomes
available again, it will be included in its assigned position.)
= Alternate Route on Line Failure – selects the first port that is not in a failed
1
state. If the selected port does not make a connection, the call will be cleared, even
if other ports are available.
= Alternate Route on Line Busy – selects the first port that has LCNs available
2
(is not busy). If the port has failed, the next available port will be selected.
= Least LCN with Throughput – selects the line with the minumum loading, cal-
3
culated by weight and number of LCNs in use on that line. (Each line is assigned
a weight proportional to its throughput within the routing path.)
If use of a routing algorithm is not desired, simply accept the default, and specify only
one routing path.
will redirect (if ) all calls to Redirection Address 0 instead of the primary address. If
Y
that address cannot be reached and
are set to , a call will be placed to Redirection Address 1, then (if necessary) Redi-
Y
rection Address 2, and so on.
Table 12-4 Subscriber Parameters
Valid Values
0–31 characters
0–3
Y/N
Y/N
Y/N
0–9
Y/N
FRX4000:
FRX6000:
Physical port:
Logical port:
valid address
Redirect on Busy
Default Value
none
0
N
N
N
0
N
1
0
1
0–7
0
1
0–7
1
8-63 0
none
page 8-24), for the purpose
and/or
Redirect on Out of Order
FRX4000/FRX6000 4.0 User Guide, Rev 01