Cabletron Systems Netlink FRX4000 User Manual page 351

Frame relay access products
Hide thumbs Also See for Netlink FRX4000:
Table of Contents

Advertisement

System Events
312.
Tran Frm/Sec exceeded T:"n" C:"n"
Severity:
4
Meaning:
The port statistic
threshold (
value.)
Action:
If this happens frequently, you may need to reroute some traffic.
313.
RTrn Frm/Sec exceeded T:"n" C:"n"
Severity:
4
Meaning:
The port statistic
exceeded the threshold (
current value.)
Action:
If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
314.
FCS Rej/Sec exceeded T:"n" C:"n"
Severity:
4
Meaning:
The port statistic
exceeded the threshold (
current value.) A value consistently greater than zero indicates line
problems.
Action:
If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
315.
Log Rej/Sec exceeded T:"n" C:"n"
Severity:
4
Meaning:
The port statistic
threshold (
value.) Logical Rejects are the sum of Rejects and Frame Rejects. A
value consistently greater than zero indicates line problems.
Action:
If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
316.
Trn Err Ratio exceeded T:"n" C:"n"
Severity:
4
Meaning:
The port statistic
(
T:"n"
Transmit Error Ratio is the ratio of retransmitted frames per second
to successfully transmitted frames per second.
Action:
If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
317.
Rcv Err Ratio exceeded T:"n" C:"n"
Severity:
4
Transmitted Frames/Sec (*100)
) that was set by the user. (
T:"n"
(Retransmitted)
Retran
T:"n"
(Frame Check Sequence)
FCS
T:"n"
Logical Rejects/Sec (*100)
) that was set by the user. (
T:"n"
Transmit Error Ratio
) that was set by the user. (
has exceeded the
is the current
C:"n"
Frames/Sec (*100)
) that was set by the user. (
Errors/Sec (*100)
) that was set by the user. (
has exceeded the
is the current
C:"n"
has exceeded the threshold
is the current value.) The
C:"n"
has
is the
C:"n"
has
is the
C:"n"
21-7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Netlink FRX4000 and is the answer not in the manual?

This manual is also suitable for:

Frx6000Netlink frx6000

Table of Contents