Configuring A Network Trunk; X.25 Port Trunk Parameters - Cabletron Systems Netlink FRX4000 User Manual

Frame relay access products
Hide thumbs Also See for Netlink FRX4000:
Table of Contents

Advertisement

Configuring a Network Trunk

Configuring X.25
A network trunk is a link between Cabletron frame relay access devices (FRX4000,
FRX6000, SmartSwitch 1800, FRM), over X.25. Other ports in the node can be
assigned to a "trunk group," which will cause those ports to be disabled if the network
trunk is not operational (and enabled when the trunk becomes operational). One
network trunk in a node can be assigned to another network trunk's group; however,
disabling/enabling a network trunk will not affect another network trunk in that trunk's
group.
X.25 Port Parameters (screen 5 of 6)
* RLP: 0 Port: 5 Link State: Linkup
* I/O: V.35
A Network Trunk
B Add to Trunk Group
C Delete from Trunk Group
D Add a Range to Trunk Group
E Delete a Range from Trunk Group
Ports Associated with Network Trunk
0
1
LP 0
N
N
LP 1
N
N
LP 2
N
N
LP 3
N
N
LP 4
N
N
LP 5
N
N
LP 6
N
N
LP 7
N
N
Option:
Figure 8-3 X.25 Port Trunk Parameters
LP 1–7 have no significance on an FRX4000 display.
If
Network Trunk
You can add or delete one or more ports as described in menu entries B–E in Figure
8-3. To add or delete a range of sequentially numbered ports (e.g., RLP 1, port 3
through RLP 2, port 2) of the same port type, press
prompted) the port type, first RLP and port, and last RLP and port. The screen will be
re-displayed, with the
Y/N
Adding or deleting a range has no affect on any port types within that range
other than the type specified.
To add or delete a single port, multiple ports that are not in sequence, or multiple ports
of different types, press
be re-displayed, with the
port you want to add or delete.
Database
Y
2
3
4
5
6
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
is
, the rest of the above screen has no relevance.
N
status changed for each affected port.
or
and enter an RLP and port number. The screen will
[B]
[C]
status changed for the port. Repeat this process for each
Y/N
Node Name=nodexyz
7
N
N
N
N
N
N
N
N
or
and enter (when
[D]
[E]
8-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Frx6000Netlink frx6000

Table of Contents