Stopping Operation; Logging Out; Rebooting; Shutting Down - Cabletron Systems Netlink FRX4000 User Manual

Stopping Operation

Logging Out

Rebooting

Shutting Down

What Next?

2-12
If you have been working within menu operations and wish to log out, press
Main Menu. The Port Status Display screen will be displayed, with any updates. The
software will continue to run, but only those who know the password will be able to
gain access to the menus. You must press
the Main Menu.
To reboot from within the menu level, press
You cannot reboot the device from the initial Port Status Display. You must
first press
[F1]
Rebooting the device clears all connections. If you do not want to
do this, simply press
To shut down an FRX4000 or FRX6000, simply switch it off.
Make sure all users of the device are aware that it will be shut
down.
Once you are familiar with the menus and how they work, proceed to Section II to con-
figure the database.
and enter the password to get back into
[F1]
[F10]
and enter the password to get to the Main Menu.
to log out, then leave the device running.
[F4]
. When asked:
Reboot?
FRX4000/FRX6000 4.0 User Guide, Rev 01
at the
[F4]
, press .
[Y]