Cabletron Systems Netlink FRX4000 User Manual page 141

Subscriber Name
Logical Channel
RLP
Port
Packet Size
Window Size
Configuring X.25
Priorities are configured on all logical interfaces that use a physical frame relay port.
The device processor in the node uses these priorities to help determine the order in
which it will process protocols.
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the FRX4000/6000.
identifies the subscriber to the console operator. The software does not use this infor-
mation.
is a logical link between the node and the subscriber. The physical line may have a
number of logical channels. An LCN assigned to a port in a PVC must be lower than
the lowest LCN specified for any SVC subscriber on the same port.
identifies the RLP that contains the port specified for the next parameter.
specifies the port at each end of the PVC.
allows setting a packet size for each end of the PVC. Generally the same packet size
will be configured on the port at each end, as well as in the PVC.
allows setting a window size for each end of the PVC. Generally the same window size
will be configured on the port at each end, as well as in the PVC.
8-35