Cabletron Systems Netlink FRX4000 User Manual page 29

Getting Started
Table 2-2 FRX6000 Port Assignments
Card Port
Interface
RLP4 4
(contd.) 5
6
7
RLP 5 0
1
2
3
4
5
6
7
RLP 6 0
1
2
3
4
5
6
7
RLP 7 0
1
2
3
4
5
6
7
3
LAN 0 n/a n/a
3
LAN 1 n/a n/a
Physical interface, determined by the LIC and attached cable (except T1 and E1 LICs, which do
1
not include cables). Possible interfaces (with LICs in parentheses) are: V.35 (V.35), RS-232
(RS-232), RS-449 (RS-422), X.21 (RS-422), RS-530 (RS-422), T1 (T1), or E1 (E1).
Each cable is physical DTE (male connector) or DCE (female connector). Add a
interface type to record this information.
All possible protocols are listed below:
2
Ports 0–7: Frame relay, X.25, SDLC, BSCI (Interactive), BSCB (Batch), Async.
LAN Ports: IP, IPX, Bridge, LLC2.
Note that LAN protocols (IP, IPX, Bridge, LLC2) are also assigned to physical frame relay ports
via interface records that map the protocols to the physical ports.
If there is only one LAN card, it will always be card 0.
3
1 2 Connected Device
Protocol
(continued)
or to the
T C
2-5