Ip Interface Parameters; Frame Relay Ip Interface Parameters - Cabletron Systems Netlink FRX4000 User Manual

IP Interface Parameters

13-8
Table 13-2 through Table 13-4 list all possible IP Interface parameters. (Some will not
be displayed, depending on how others are configured.) Because several parameters
apply to more then one interface type, descriptions of all IP Interface parameters
follow Table 13-4.
Table 13-2 Frame Relay IP Interface Parameters
Parameter
Maximum Transmission Unit
Routing Metric Count
ICMP Redirects
RIP Support
(sec)
RIP Flash Updates
(sec)
RIP Full Updates
Priority
Bandwidth Allocation Group
Interface Type
FRX6000 only)
Source Card (
Source Port
Source DLCI
Enable Inverse ARP
Destination IP Address
Unnumbered Interface
Source IP Address
Network Mask
Make sure the frame relay port is not configured (in the Port record) for
1
Make sure the DLCI is not part of a
2
relay PVC.
for new interfaces, N for interfaces already configured when the current release of
Y
3
FRX4000/6000 software is installed.
255.255.255.255
4
See the caution following these footnotes. The default value of
5
configured automatically, to reflect the appropriate address class, after the
is specified. If the interface is configured as unnumbered (and, therefore, no
Address
Source IP Address
the numbered interface that is assigned.
If a
will automatically change to a default value appropriate
for the new address. For this reason, configure the
IP Address
Valid Values
1–4096
0–255
Y/N
(Enabled),
0
(Disabled)
2
5–300
10–300
0–9
1–16
FRL (frame relay)
0–7
1
0–7
16–991
Y/N
1.0.0.0–223.255.255.255
Y/N
1.0.0.0–223.255.255.255
255.0.0.0–255.255.255.255
frame relay DLCI backup group
is valid only on a point-to-point interface.
is configured), the default value of
is specified/changed, the
Source IP Address
first, then the
Default Value
1500
0
Y
(Rcv only),
1
0
10
30
5
1
FRL
0
0
2
16
see note
none
see note
none
4
255.0.0.0
backup use
or intra-nodal
Network Mask
Network Mask will be taken from
.
Network Mask
FRX4000/FRX6000 4.0 User Guide, Rev 01
(Enabled)
3
3
5
only.
frame
will be
Source IP
Network Mask
Source