Displaying Port Status; Port Status Display - Cabletron Systems Netlink FRX4000 User Manual

Displaying Port Status

Information in this Display:
19-2
Press at the Status Displays Menu to display the status of all serial lines on this
[B]
node (LAN port status is not displayed).
Port Status Display (Page 1)
L P Type PPS
0 0 X25 62
0 2 X25 112
0 4 SNA 110
1 0 ASY 0
Ethernet
If the node has more than 32 ports, some of them will be displayed on sub-
sequent "pages" (up to 18 total) of the above menu. Press
them.
– is the RLP number.
L
– is the port number.
P
– is the port type:
Type
= Frame relay
FRL
= BSC Interactive
BSI
= Logical
LOG
= 802.5.
8025
– is packets per second passing through the port.
PPS
– is the number of virtual connections currently in use.
Conn#
: – The necessary level 1 modem signals are present, and the level
State Linkup
2 link is up. (For frame relay PVCs, this state means that LMI is running.)
Restarting
sequence.
Operational
data. On a frame relay logical DTE port with link layer management con-
figured, this state means that the port has received a Full Status Response
Conn# State L P Type PPS
4 Operational 0 1 X25 127
7 Operational 0 3 X25
3 Operational 0 5 X25
0 Disabled 1 1 X25
Figure 19-2 Port Status Display
= X.25
X25
= BSC Batch
BSI
= Ethernet
Eth
– Level 2 is up and level 3 is starting its initial handshake
– The line is up and ready to establish a connection or transfer
Node Name=node_xyz
Conn# State
12 Operational
60 6 Operational
87 5 Operational
88 4 Operational
[C],[B] from Main Menu
[PgDn]
= SNA
SNA
= Async PAD
ASY
= 802.3
8023
FRX4000/FRX6000 4.0 User Guide, Rev 01
to display